Exit
800.965.0020 Email

Product Catalog

Request Information
Connectronics underwater series connectors offer reliable performance in demanding underwater interconnection applications today. It's critical water sealing interface, stainless steel hardware, and water sealing over-molding provide excellent underwater environmental protection.
Unit of Measure

Specifications

Direct Current (DC) Operating Voltage Rating

 N/A 300 V

Maximum Current

 N/A 7.5 A

Environmental Pressure

 N/A 0 to 500 psi

Environmental Temperature

 N/A -10 to +80 ºC

Electrical Test Conditions

 N/A Mated connectors are hydrostatic pressure tested to 500 p.s.i. to insure reliable performance in the field.

Connector Hardware Material

 N/A Stainless Steel, Type 316 Per QQ-S-763. Passivated Per QQ-P-35

Plug Insulator Material

 N/A Neoprene Rubber

Receptacle Insulator Material

 N/A Glass Filled Epoxy

Wire/Cable Material

 N/A Cable: #22 AWG TPC stranded conductor with PVC insulation, followed by a foil shield and polyurethane jacket. Plug over molding: Polyurethane rubber.
Wire:Size #20 solder cup contacts are designed to accommodate up to a #20 AWG wire.

Socket Contacts Material

 N/A Meets applicable portions of MIL-C-39029

Pin Contacts Material

 N/A Half hard brass per QQ-B-626, gold plated per MIL-G-45204

O-Ring Material

 N/A Nitrile (Buna-N) Rubber

Features

 N/A
  • O-Ring Sealed interface
  • 300 VDC Operating Voltage
  • Temperature Range -10°C to +80°C
  • Hydrostatic tested to 500 p.s.i.
  • Strain relief over molded
  • Stainless steel hardware
  • Interface available in 9 & 20 pin
  • Reliable performance

Applications

N/A

  • Sensors
  • Testing
  • Data collection
  • Misc. low voltage power distribution

Ordering Information

N/A Receptacle assemblies can be ordered as kits or terminated with wire to meet specific requirements. Plug assemblies are pre-terminated with cable. various custom cable configurations are available. consult connectronics For additional information.
Also available from connectronics are a wide variety of connectors to connect the underwater assemblies to PC board jumper pins and I/O devices. Please consult factory for additional information.

Back to Top