Connectronics Corp.
2745 Avondale Ave
Toledo, OH, 43607 3232, US
Phone: 419.537.0020
Fax: 419.537.0007
Toll-free: 800.965.0020
Email: Info@connectronicscorp.com
Website: http://www.connectronicscorp.com
All Categories > Underwater Cables and Connectors > UWC Series Electrical Connectors > Item # 10039-XX  


Item # 10039-XX, UWC Series 20-Pin Plug and Receptacle Assembly

Connectronics underwater series connectors offer reliable performance in demanding underwater interconnection applications today. It's critical water sealing interface, stainless steel hardware, and water sealing over-molding provide excellent underwater environmental protection.





Specifications  · Applications  · Ordering Information

Specifications

Direct Current (DC) Operating Voltage Rating
300 V

Maximum Current
7.5 A

Environmental Pressure
0 to 500 psi

Environmental Temperature
-10 to +80 ºC

Electrical Test Conditions
Mated connectors are hydrostatic pressure tested to 500 p.s.i. to insure reliable performance in the field.

Connector Hardware Material
Stainless Steel, Type 316 Per QQ-S-763. Passivated Per QQ-P-35

Plug Insulator Material
Neoprene Rubber

Receptacle Insulator Material
Glass Filled Epoxy

Wire/Cable Material
Cable: #22 AWG TPC stranded conductor with PVC insulation, followed by a foil shield and polyurethane jacket. Plug over molding: Polyurethane rubber.
Wire:Size #20 solder cup contacts are designed to accommodate up to a #20 AWG wire.

Socket Contacts Material
Meets applicable portions of MIL-C-39029

Pin Contacts Material
Half hard brass per QQ-B-626, gold plated per MIL-G-45204

O-Ring Material
Nitrile (Buna-N) Rubber

Features
  • O-Ring Sealed interface
  • 300 VDC Operating Voltage
  • Temperature Range -10°C to +80°C
  • Hydrostatic tested to 500 p.s.i.
  • Strain relief over molded
  • Stainless steel hardware
  • Interface available in 9 & 20 pin
  • Reliable performance


Applications
  • Sensors
  • Testing
  • Data collection
  • Misc. low voltage power distribution


Ordering Information
Receptacle assemblies can be ordered as kits or terminated with wire to meet specific requirements. Plug assemblies are pre-terminated with cable. various custom cable configurations are available. consult connectronics For additional information.
Also available from connectronics are a wide variety of connectors to connect the underwater assemblies to PC board jumper pins and I/O devices. Please consult factory for additional information.



Print Back