Product Catalog
Connectronics' line of in-line disconnects utilize the resilient properties of silicone rubber to provide an interlocking mechanism in a push/pull arrangement. The tapered interface excludes air from the critical area of the mating surfaces thus providing a superior Corona Resistant high voltage connection. These connectors are available pre terminated to high voltage wire, or as field assembled kits.
Unit of Measure
Specifications
Direct Current (DC) Voltage |
N/A 45 kV |
Direct Current (DC) Dielectric Withstanding Voltage (DWV) Rating |
N/A 55 kV |
Maximum Current |
N/A 14 A |
Pin Contacts Material |
N/A Half hard brass per QQ-B-626, gold plated per MIL-G-45204 |
Socket Contacts Material |
N/A Meets applicable portions of MIL-C-39029 |
Insulators Material |
N/A Silicone rubber per ZZ-R-765 for applications where maximum fluid resistance is required, fluorosilicone molded noses are available. (machined) high performance plastic plug (male) insulators are available for special applications - consult factory for ad |
Wires |
N/A
Wire (standard): No. 16 AWG tin plated copper, silicone insulated, No. 12 AWG tin plated copper, silicone insulated (Optional): For AC or "Low Noise" applications a No. 16 AWG or No. 12 AWG silver plated copper conductor. |
Dimension "A" |
N/A 2.56 in |
Diameter "B" |
N/A 0.781 in |
Diameter "C" |
N/A 0.294 in |
Sea Level Altitude |
N/A Up to 70,000 ft |
Environmental Temperature |
N/A -55 to +125 ºC |
Mating Part Number |
N/A 11173-XX 11175-XX |
Features |
N/A
|
