Exit
Outstanding Features
  • High Temperature -55ºC thru 200ºC
  • High Voltage 1 KVDC thru 30 KVDC
  • 28 AWG thru 20 AWG conductors
  • High Flexibility
  • Pre-etching provides a bond ready FEP surface compatible with potting materials. (i.e epoxy based)
  • Small Diameter
  • Nomex Braid offered for abrasive applications
  • Reference: MIL-W-22759
  • Ozone and Corona Resistant
  • FEP Resins meet flammability requirements of UL94V-O
  • All wires are RoHS Compliant
Wiremax High voltage Teflon insulated wires manufactured with FEP insulation offer the following:

Fluorinated Ethylene Propylene (FEP) offers an excellent combination of properties that include: exceptional dielectric properties, a low dielectric constant over a wide frequency range, chemical inertness including transformer oils and dielectric fluids, heat resistance with retention of properties after service at 400° F (204° C), toughness, flexibility, possesses a very high degree of stress crack resistance, low coefficient of friction, low flammability, negligible moisture absorption, has long term weatherability and excellent resistance to ozone sunlight and weather. FEP offers the lowest refractive index of all thermoplastics with low light reflection (the same as water)
Unit of Measure

Specifications

Plating

N/A Electroless Nickel

Shell, Coupling Nut, and Related Hardware Material

N/A Aluminum alloy 6061-T6 per QQ-A-225/26

Finish Specifications and Options

N/A Electroless Nickel Plated per MIL-C-26074
Optional Stainless Steel Hardware- 300 series stainless steel per ASTM A582, passivated per QQ-P-46

Sea Level Altitude

N/A Up to 70,000 ft

Environmental Temperature

N/A -55 to +125 ºC

Features

N/A
  • Corona Resistant Tapered Interface
  • Field or Factory Assembled
  • Various Hardware Platings Available
  • Available in Stainless Steel
  • Threaded Coupling Available in Knurled or Hex Nut
  • Use with Shielded or Unshielded Cable

Note

N/A Stainless steel hardware is available upon request, consult factory for availability.
Connector "KITS" are supplied with insulators assembled (and bonded) into shell and contacts packaged separately with assembly instructions. Also available from Connectronics Corp. is a wide range of extruded silicone insulated and silicone coated PTFE insulated wire designed for use with all connector assemblies listed. Please consult factory for additional information.

Applications

N/A

  • Electronic Countermeasures
  • Radar
  • CRT Displays
  • Traveling Wave Tubes
  • Lasers
  • High Voltage Power Supplies
  • Medical Applications

Back to Top