800.965.0020 Email
"Connectronics" flash lamp connection series offers a low cost high current interconnection solution to applications where space, weight and temperature are a concern. The use of the "Multilam band" contact spring finger technology provides for higher current ratings with lower temperature rise than conventional contact designs. Contacts are available with silicone rubber over moldings attached to high voltage wire, providing a higher voltage barrier.

  • High Current Ratings
  • Operating Voltage: through 12 KVDC
  • Temperature Range: -40°C to +175°C
  • Sea Level to 10,000 ft Operation
  • Overmolded Strain Relief available
  • 4mm, 5mm, 5.5mm and 6mm options
  • Stackable or Threaded options
Unit of Measure


N/A 6 mm0.236 Inch



Current Rating

N/A 100 Amp


N/A Sea level to 10,000 ft.

Temperature Range

N/A -40 to +175 °C

Material - Molded Strain Relief

N/A Silicone rubber, grey

Material - Contact Body

N/A Tellurium copper alloy 145, silver plated per qq-s-365

Material - Multi-Lam Contact Band (Spring Fingers)

N/A Beryllium copper alloy, gold plated per mil-g-45204

Material- Wire/Cable

N/A Assemblies supplied with wire are terminated with #12 AWG (19/25; SPC conductor with silicone insulation rated for 20 KVDC (0.205 dia.) 1 REF. connectronics part no . 066-035-01.


  • Laser
  • Back Lighting & Illumination
  • Percussion

N/A Flash lamp plugs can be ordered as single ended or double ended assemblies in any combination of molded plug or socket contact at each end. Consult factory for custom configuration part numbers.

Flash lamp contacts can be ordered with or without wire terminated. connectronics offers a variety of wire constructions for use with flash lamp contacts. Consult factory for additional information.

Back to Top