Product Catalog
Features
- O-Ring Sealed interface
- 300 VDC Operating Voltage
- Temperature Range -10°C to +80°C
- Hydrostatic tested to 500 p.s.i.
- Strain relief over molded
- Stainless steel hardware
- Interface available in 9 & 20 pin
- Reliable performance
Voltage Rating- Operating |
N/A 300 KVDC |
Max. Current |
N/A 7.5 Amp |
Environmental Pressure |
N/A 0 to 500 psi |
Environmental Temp. |
N/A -10 to +80 °C |
Electrical Test Conditions |
N/A Mated connectors are hydrostatic pressure tested to 500 p.s.i. to insure reliable performance in the field. |
Material - Connector Hardware |
N/A Stainless steel, type 316 per QQ-S-763. Passivated per QQ-P-35. |
Material- Plug Insulator |
N/A Neoprene Rubber |
Material - Receptacle Insulator |
N/A Glass filled epoxy |
Material- Wire/Cable |
N/A
Cable: #22 AWG TPC stranded conductor with PVC insulation, followed by a foil shield and polyurethane jacket. Plug over molding: Polyurethane rubber. Wire:Size #20 solder cup contacts are designed to accommodate up to a #20 AWG wire. |
Material- Socket Contacts |
N/A Meets applicable portions of MIL-C-39029. |
Material- Pin Contacts |
N/A Half hard brass per QQ-B-626, Gold plated per MIL-G-45204. |
Material - O-Ring |
N/A Nitrile (Buna-N) rubber |
N/A
|
N/A
Receptacle assemblies can be ordered as kits or terminated with wire to meet specific requirements. Plug assemblies are pre-terminated with cable. various custom cable configurations are available. consult connectronics For additional information. |